last update December 14, 2015

- News 2015

A Letter from the President

St.ClausPlease Note:
Our company is closed for holidays from December 23, 2015 until January 10, 2016.

December 2015

MU-2 Fly-In / Photo by Mike Collins, © AOPA
MU-2B fly in / Aiken at Air1st...2016.
For more information contact Mike Leaver. Photo by Mike Collins, © AOPA.

November 2015

Thank you for visiting us at the NBAA BUSINESS AVIATION CONVENTION & EXHIBITION November 17-19, 2015 • Las Vegas, NV

MT-Propeller received new propeller type certifications for the MTV-15 in Argentina and the MTV-34-1 in South Korea.

MT-Propeller welcomes a new Service Center in India - Indamer Aviation Private Limited

October 2015

Reno AirRace Winner 2015

MT-Propeller congratulate the Reno Silver Race Winner David Robinson with his Lancair Legacy and the MTV-9 Propeller.

July 2015

Thank you for visiting us at the Oshkosh Airventure July 20-26, 2015.

June 2015

MT-Propeller has got the Type Certification for the 2-blade hydraulic constant speed propeller MTV-21 in Japan.

May 2015

BLR Aerospace and MT-Propeller teamed up for new performance package and quality of ride.

MT-Propeller developed the new 5-blade propeller for the KingAir fleet, called Whisper Prop™, which was designed to improve aircraft performance, safety and comfort. It is available for installation on King Airs invidually or in a package with the BLR Winglet System.

Due to the excellent vibration damping caracteristics of MT-Propellers natural composite blades and the multiple blade concept which results in a reduced diameter, the Whisper Prop™ shows exceptionally quiet operation, and best FOD protection for unimproved runways. Compared to the standard King Air propeller, the Whisper Prop™ reduces noise by 30-50 percent, measuered in dB, denpending on frequency.
Combined with the installation of BLR Winglets on the KingAir, the system also delivers runway length reductions up to 33 percent, which gains access to shorter local fields, to reduce trip times with improved safety margins.

The intention of BLR Aerospace to offer the Whisper Prop™ and Winglet package for the KingAir was to provide greater performance and more comfortable cabin environment. BLR Aerospace Vice President of Sales and Marketing Dave Marone said. “Until now, this level of quiet comfort has been unavailable to the King Air market.”

BLR Brochure
Article in Flight Global Magazine

April 2015

100th Pilatus PC12 converted to 5 bladed QFJ MT-Propeller

100th converted PC12
5 years after introduction and EASA/FAA certification of the Quiet Fan Jet 5 bladed propeller System for the Pilatus PC12 the 100th PC 12 was converted to our new propeller system.
The customers are impressed by the improved performance in take off (15% shorter), climb (10% faster) and cruise (up to 4kts faster) plus the unmatchable cabin comfort with a jet like vibration level and reduced cabin noise by up to 6 dB(A). The TBO for the propellers is presently 3000hrs or 6 year and will be increased to 3500hrs soon.
Customers around the world are using this latest generation propeller system. The PC12 fleet has accumulated over 100,000 hours of flight time with the 5-blade MT-Propeller.

100th converted PC12Phelps Lane, owner of the Cygnus Lift company, told us his impression after installation of the MT-Propeller on his PC12, which was the 100th PC12 converted:

Yes, the propeller shortens takeoff, greatly increases climb rates, and reduces noise and vibration to the point where my passengers have made comments about the difference in the cabin. This is a much needed modernization to the front of the PC-12, and I recommend the upgrade to the 5-bladed MT propeller to any and all PC-12 owners and operators. It is like having a new aircraft!

Graphic Sun 'n Fun Thank you for visiting us at the Sun 'n Fun Fly In in Lakeland, Hangar A, Stand 82 and 83, Florida April 21-26, 2015

Thank you for visiting us at the Aero in Friedrichshafen Halle A3, Stand 409, April 15 – 18, 2015

February 2015

MT-Propeller welcomes our 3rd Sales and Service Center in China.
With the growing demand of Aviation in China, MT-Propeller found excellent partners to perfectly service our Chinese Customers using our light weight, low noise efficient propeller systems.

In the last 2 years MT-Propeller certified a complete new product line of 2 bladed/3 bladed/4-bladed propeller systems.

These propeller systems are the lightest certified and vibration approved propeller models available today.
The 2-bladed propeller with 6.5 kg (14,3 lbs), the 3-bladed propeller with 9.5 kg (21 lbs) and the 4-bladed propeller with 11.5 kg (25,3 lbs) can be used as a full constant speed or ground adjustable version on tractor or pusher applications within the limitations of the TCDS.
They are presently EASA certified according to EASA TCDS P.044 / P.048 and P.049.

With the certification of the lightest certified constant speed propellers in the world, MT-Propeller also received the certification by the EASA (EASA TCDS P.104) and FAA ( P22BO) for the 5-bladed MTV-27 propeller model with a maximum diameter of 3 m (118 inch) with a maximum rating of 1700 hp and 1700 rpm.

With this certification the MTV-27-Propeller is the lightest choice for the high power turbines with a reduced weight compared to the only available steel hub/aluminum blade option which is approximately 25 kg / 55 lbs heavier than the MT-Propeller.

This propeller gives a great opportunity to airplane manufactures for a new low weight, low noise, high performance option.

EASA TCDS for the lightest certified constant speed composite 4 blade MTV-36-1() propeller with a weight of only 11,5 kg (25,3lbs)

January 2015

four-leave clover

We wish all our customers a very Happy and Successful Year 2015!

News 2014

Certification News 2015

Aermacchi with MTV-9 installed MT-Propeller has received the EASA STC No. 10055270 for the Aermacchi F260, -B, -C, -D with the MT-Propeller model MTV-9-B/188-50.

Robin 300/400 with MTV-6 installed MT-Propeller has received the EASA STC No. 10055251 for the Robin 300/400 with the MT-Propeller model MTV-6-A/190-69.
The STC provides reduced ground roll distance and enhanced climb performance.

Cirrus SR20 with MTV-12 installed MT-Propeller has received the EASA STC No. 10055250 for the Cirrus SR20 with the MT-Propeller model MTV-12-D/188-59b. Advantages: Improved performanc, less weight

Piper PA30 with MTV-12 installed MT-Propeller has yet received the FAA STC No. SA03563NY for the PA-30/39 with the MT-Propeller model MTV-12-C-C-F/CF(L)180-57.
The STC provides: Improved take-off and climb performance with turbine like smoothness and low noise.
It is also certified by TCCA Canada with STC No. SA13-34 and EASA STC No. 10047589.

MT-Propeller received the ANAC Brazil Validation of the EASA STC #10046759 for the 5-blade installation on the Beechcraft 90 series, for the 5-blade installation STC # 10050861 on the Beechcraft 300/350 Series and for the installation of the 5-blade MT-Propeller on the Beechcraft 200 Series

TBM 900 with MTV-27 installedMT-Propeller has yet received the EASA STC No. 10033038 R1 on TBM 900
MT-Propeller was the first company to certify a 5 blade composite propeller on the fast TBM Series Aircraft.
Summarized it can be said, that the MTV-27 has lower weight, lower vibration, lower inside / outside noise with the same performance and more comfort compared to the original OEM TBM 900 propeller.
This installation is also supplemental certified by FAA STC No. SA02958NY.

Cessna 177 with MTV-9 installedMT-Propeller has yet received the EASA STC No. 10054682 for the installation of the 3-blade MTV-9 Propeller on the Cessna C177.
FAA STC i.p.

Cessna 206 with MTV-9 installedMT-Propeller has yet received the EASA STC No. 10054487 for the Cessna 206 Series with the 3-blade MTV-9 Propeller. The installation improves performance and reduces noise significantly.

Cessna 208 with MTV-27 installedMT-Propeller has yet received the EASA STC No. 10054488 for the Cessna C208 Supervan 900 with the 5-blade MTV-27 Propeller. The installation improves the overall performance of the aircraft and reduces vibration. FAA STC i.p.

Rockwell Commander 114 with MTV-9 installedMT-Propeller has yet received the EASA STC No. 10054490 for the Rockwell Commander 114 Series with the 3-blade MTV-9 Propeller. FAA STC i.p.

Rockwell Commander 112 with MTV-12 installedMT-Propeller received the EASA STC No. 10054491 for the Rockwell Commander 112 Series with the 3-blade MTV-12 Propeller. FAA STC i.p.

PA-46-310P/-350P with MTV-5 installed MT-Propeller received the FAA STC #SA03542NY for the PA-46-310P/-350P conversion with the latest generation 5 bladed scimitar propeller MTV-27-1-E-C-F-R(P)/CFR203-58d.
The STC provides: Overall Improved performance with a jet like vibration and noise signature. It is already certfied by EASA STC#10049811

Beech A36 with MTV-5 installed MT-Propeller received the FAA STC #SA03535NY for the Beech A36 RR250 conversion with the latest generation 5 bladed scimitar propeller MTV-5-1-D-C-F-R(A)/CFR210-56.
Overall Improved performance with a jet like vibration and noise signature.
It ist already certified by EASA STC STC#10051683.

Extra 300/200 with MTV-9 installed MT-Propeller Entwicklung GmbH received the FAA for the installation of the 3-blade MT-Propeller MTV-9-B-C/C188-18B on the Extra 300/200 FAA STC is following.

GA8 AirVan with 3-blade MTV-9MT-Propeller received the EASA STC #10043965 for the GA8 AirVan with the 3-blade MTV-9-B/200-58.
Dramatically reduced noise and vibration level.
Reduced Weight and improved performance in take off, climb and cruise.
Also models with increased weight to 1905 kg MTOW are supplemental type certified in Europe with the new MT Propeller.
FAA STC following.

FAA STC for QFJ 5-blade MT-Propeller on Beech King Air 350

Beech King Air 330/350 with MTV-27MT-Propeller Entwicklung GmbH has yet received the FAA STC #SA03525NY for the next generation 5-blade scimitar composite propeller MTV-27-1-E-C-F-R(P)/CFR260-65b on the Beech King Air 300/350 Series (Beech 300, 300LW, B300, B300C) powered by the Engines P&WC PT6A-60A.
The installation is also EASA certified by STC#10050861.

King Air B90 with 5-blade MTV-27 MT-Propeller Entwicklung GmbH has now received the FAA STC #SA03507NY for the QFJ-Propellers MTV-27-1-E-C-F-R(P)/CFR210-58d on the King Air 90 Series.

The STC provides an overall performance improvement and jet like noise and vibration level.
It is also fulfilling the highest European noise regulations for unrestricted flying.
It ist also certified by EASA STC# 10046759 and DGCA India by Acceptance of the EASA STC.

Luscombe with 2-blade MTV-11 Luscombe 8E, -F Series with 2-blade MTV-11 Propeller is now supplemental type certified by FAA STC No. SA02508LA.
STC Holder is Edward R. Warnock

Piper PA24 with 3-blade MTV-9 Piper PA24 Series with the new generation composite 3-blade MTV-9 Propeller system now FAA certified by STC No. SA03501NY
The new generation 3 bladed scimitar propeller MTV-9-B/188-50 improves the overall performance and reduces the cabin noise and vibration dramatically.

Already EASA certified by STC No. 10047063.

GA8 Airvan with MTV-9 installed MT-Propeller has received the EASA STC No. 10043965 for the GA8-TC320 Airvan with the new scimitar composite propeller MTV-9-B/200-58.
The propeller improves cruise speed by 2 to 4 kts, provides a turbine smooth run and reduces inside and outside noise drastically.
It also improves ground clearance because of the reduced diameter.
The highest European noise requirements for unrestricted flying will be fulfilled with this propeller system.
The FAA STC is following.

Cessna 400 with 4-blade MTV-14 MT-Propeller has received the EASA STC for the
Cessna 400 series with MTV-14-D/195-30b.
The new STC provides:
Better take-off and climb, Increased cruise speed by 3 kts, Turbine run: smooth, and drastically reduced inside and outside noise level.
EASA STC #10042834, FAA STC following.

Piper Malibu with 4-bladed MTV-14 Piper Malibu Series:
MTV-14-D/195-30b with scimitar blades now EASA certified for PA46-310P/350P/350T.
STC complies with the highest German noise requirements, improves climb speed and increases cruise speed by 3-5 kts.
FAA STC i.p.
more information about the STC

Jetstream 32 with MTV-27 installedNew 5 blade Propeller for Jetstream 32
The MTV-27-1-E-C-F-R(G)/CFRL250-103 should give the Jetstream a jet like noise and vibration signature with improved performance.
FAA certification i.p.
EASA STC No. 10027439

Cessna 414A with MTV-14 installedCessna 414A in certification progress with the 4-blade scimitar MTV-14-D-C-F/CF188-30g propeller. Improved overall performance with a turbine like noise and vibration signature.
EASA certified
FAA certification i.p.